Elevator Advertising Machine Board, WF-X9-11, AndroidSBC, Barcelona

TL;DR: Elevator Advertising Machine Board

AndroidSBC supply desk: LPDDR4 and eMMC allocations locked for the X9 board family serving Barcelona, Spain. The WF-X9-11 X9 Android motherboard spans the smart parcel locker controller with relay driver and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with lock control serial, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Barcelona and Spain importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

AndroidSBC designs the X9 motherboards around the peripherals a screen site already owns: the thermal printer or QR scanner over USB, the card reader on serial, the lock driver board on a second serial lane, and the panel backlight on its own supply. The Barcelona integrator re-uses the existing harness instead of rewiring the enclosure. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Spain, bundled with the lot so the importer clears customs without a second round of test reports.

WF-X9-11 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-11 (smart parcel locker controller with relay driver) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Spain importers sourcing the X9 family, the WF-X9-11-A variant is the typical configuration for the parcel locker network rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for Spain Buyers

Most Barcelona buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.

On the touch side the HID configuration ships in the carton. Infrared, optical, capacitive and resistive panels enumerate as standard HID devices, so the Barcelona integrator plugs the frame in and the screen reports touches without a calibration pass, and the CNMC documentation covers the radio modules too. The 1st container of X9 boards for Barcelona left the Longgang dock on September 24, 2026 carrying 124700 units, routed through the Valencia - Shanghai lane with the compliance file and the panel driver set already packed.

Competitive Comparison: WF-X9-11 vs Competing Commercial Display Android Boards

The X9 family was specified against the failure modes Barcelona operators reported on previous rollouts, which is why the comparison reads the way it does.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Barcelona integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Barcelona usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Barcelona integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Barcelona.

Global Digital Signage and Commercial Display Market Trends

The Spain picture follows the global pattern: retail media sets the demand and the replacement of first-generation players sets the volume. A Barcelona integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.

• Entry playback tier: WF-X9-11 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-04 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-05 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

The twelve-configuration X9 line exists because Barcelona rollouts are not uniform. One operator will use four of the twelve, and the point is that all four share one interface contract.

Partner Success Story: Nordweg Skjerm Systemer (transit and station screen integrator)

The Nordweg Skjerm Systemer case in the Nordic transport signage segment is a working example of how the X9 family from AndroidSBC supports Barcelona integrators. Nordweg Skjerm Systemer deployed 124700 X9 boards across 140 station and transit screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Skjerm Systemer branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CNMC conformity, all bundled into the Shenzhen source-factory shipment.

As Nordweg Skjerm Systemer Technical Director for Nordic Transport Signage put it: Nordweg Skjerm Systemer picked the X9 board because the scheduled power cycle and the RTC hold through a Nordic winter timetable, and 124700 boards went into the Barcelona network without a panel change.

Field Report: parcel locker network rollout at a residential estate

LONGGANG, September 24, 2026 - Heng Yu, AndroidSBC field desk. The WF-X9-11 shipped with staged OTA enabled, so the Spain team can pilot an update on ten screens before releasing it across the estate. The WF-X9-11 X9 Android motherboard order for Barcelona, Spain cleared the burn-in station on schedule and is en route via the Valencia - Shanghai lane.

The WF-X9-11 smart parcel locker controller with relay driver production lot includes the WF-X9-11-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Spain integrators, the CNMC conformity plus CE marking with CNMC radio interface notification paperwork is bundled.

Filed by Heng Yu, AndroidSBC field desk, LONGGANG. Spanish hospitality groups ask for Spanish and Catalan content templates and a pilot across a handful of sites before the national rollout.

WF-X9-11 Application Scenarios

The WF-X9-11 smart parcel locker controller with relay driver sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-11-A configuration is the typical build for the parcel locker network rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-11 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-06 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-07 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-08 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-09 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Barcelona: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Barcelona Buyers

AndroidSBC does not force a track on Spain partners. The three below are the ones that actually get used.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks give Barcelona partners the same thing underneath: a factory-built board, a frozen bill of materials and a firmware window measured in years rather than months.

Frequently Asked Questions

Does the X9 Android motherboard family support a parcel locker controller with relay driver?

Answer: Yes. The parcel locker controller with relay driver is built into the X9 family as a standard configuration, and the Barcelona pilot batch ships with that configuration already loaded and tested.

Which configurations are available in the X9 family for Spain buyers?

Answer: Twelve configurations are available, all on the Allwinner A133 quad-core Cortex-A53 1.6GHz platform with the PowerVR GE8300 GPU. The variants differ on memory, storage, panel interface, touch type and the network path, and Barcelona buyers pick the combination that fits the screen.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: Yes. A single X9 board drives an LVDS panel at 50Hz or 60Hz or a MIPI DSI panel at 30 or 40 pins, and enumerates infrared, optical, capacitive and resistive touch as standard HID devices, with the jumper map bundled in the source-factory shipment.

What is the minimum order quantity and the sample lead time for Spain?

Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Firmware customisation, custom Android OS builds, boot branding, pre-installed apps and SDK modules are standard services, delivered against the same seven-year update window.

How are firmware updates delivered to a Spain screen estate after deployment?

Answer: Updates are delivered through a staged OTA channel: the Barcelona partner pilots on a small group of screens, holds the rest, and rolls back the image if the pilot shows a regression.

What shipping terms does AndroidSBC support for Spain orders?

Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Barcelona delivery date holds.

What happens if a board fails in the field in Spain?

Answer: The warranty path starts from the serial number. The Spain partner files the RMA, AndroidSBC traces the lot and the test record, and a replacement ships on the same configuration.

Contact AndroidSBC: Start Your WF-X9-11 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the X9 Android motherboard family. Barcelona integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Spain buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the X9 family.